会议时间：2026年10月21-23日
会议地点：陕西 · 西安
报到时间：
10月21日，14:00-21:00
10月22日，08:00-08:30
主论坛：千人宴会厅，2号楼一层
Assembly: Ballroom, 1st Floor, Building 2
08:30
🎉会议开幕式/ Opening Remarks
🎤主持人/Chair:
杨杰教授，四川大学
Prof.Jie YANG, Sichuan University
*🎤*嘉宾致辞/Remarks：
宁宇总设计师/副院长，航空工业第一飞机设计研究院
Yu NING, Chief Designer/Deputy Director, AVIC The First Aircraft Institute
*🎤*嘉宾致辞/ Remarks：
洪军教授/机械学院院长，西安交通大学
Prof.Jun HONG, Dean of Mechanics Institute, Xi'an Jiaotong University
*🎤*嘉宾致辞/Remarks:
邱夷平教授，SAMPE中国大陆总会常务副理事长
Prof.Yiping QIU, Executive Vice President of SAMPE China
08:40-10:10
🎤会议主持人：
孙仁俊研究员/中航工业集团特级专家/强度专业副总师，航空工业第一飞机设计研究院
Session Chair:
Prof.Renjun SUN, Senior Expert of AVIC Group/ Strength Deputy Chief Engineer, AVIC The First Aircraft Institute
08:40-09:10
特邀报告：航空航天领域热塑性复合材料的过去、现在和未来
昂特 · 奥夫恩戈博士，民用机身全球技术中心主任，荷兰GKN福克复合材料公司
Keynote Invited: Past, Present and Future of Thermoplastic Composites in Aerospace
Dr.Arnt Offringa, Director Global Tech Center NL – Civil Airframe, GKN Fokker Aerospace B.V.
09:10-09:40
特邀报告：T800级碳纤维/聚醚謎酮(PEEK)预浸带开发及其民用航空典型结构件制造与验证
杨洋研究员/ 新材料新工艺开发及应用技术总师，中国商飞复合材料中心
Keynote Invited:
Development of a Carbon Fiber / Polyetheretherketone (PEEK) Prepreg and Manufacturing Techniques of Civil Aviation Structural Components
Prof.Yang YANG, Chief Engineer for New Materials and Processing Development and Application, COMAC Composites Center
09:40-10:10
特邀报告：高性能热塑性复合材料及其航空应用研究进展
张代军副总师/研究员，中国航发北京航空材料研究院
Keynote Invited:Development on High-Performance Thermoplastic Composites and Their Aviation Applications
Prof.Daijun ZHANG, Deputy Chief Engineer, AECC Beijing Institute of Aeronautical Materials
10:10-10:20
☕茶歇/ Coffee Break
10:20-12:20
🎤会议主持人：
张宝艳副总师/研究员，中航工业复合材料技术中心
Session Chair:
Prof.Baoyan ZHANG, Deputy Chief Engineer, AVIC Composite Technology Center
10:20-10:50
特邀报告：热塑性复合材料的新兴趋势：循环经济的可持续解决方案
迪帕 · 罗伊教授，爱丁堡大学
Keynote Invited: Emerging Trends in Thermoplastic Composites: Sustainable Solutions for a Circular Economy
Prof.Dipa Roy, The University of Edinburgh
10:50-11:20
特邀报告：连续纤维增材制造热塑性复合材料丝材研究进展
卓鹏副部长/高级工程师，中航工业复合材料技术中心
Keynote Invited: Continuous Fiber 3D Printing Thermoplastic Composites Filaments Development
Peng ZHUO, Department Deputy director/Senior Engineer, AVIC Composite Technology Center
11:20-11:50
特邀报告：3D打印热塑性复合材料空间天线点阵结构优化
尼古拉・塔图斯高级研究员，俄罗斯科学院布拉戈纳沃夫机械工程研究所（IMASH RAS）复合材料结构安全与强度实验室
Keynote Invited: Optimization of 3D-Printed Thermoplastic Composite Space Antenna Iattice Structure
Nikolay A. Tatus, Senior Researcher, Laboratory of Safety and Strength of Composite Structures, IMASH RAS
11:50-12:20
特邀报告：功能设计驱动的高性能吸波复合材料增材制造技术与应用
曹毅正高级工程师，西安交通大学
Keynote Invited: Additive Manufacturing of Functionally Designed High-Performance Microwave-Absorbing Composites: Technologies and Applications
Yi CAO, Senior Engineer, Xi'an Jiaotong University
12:20~13:20
🍚午餐/ Lunch
分论坛（一）结构设计-新材料-界面改性-性能表征，千人宴会厅A
Session Ⅰ: Structural Design-New Materials-Surface-Properties Characterization, BALL ROOM A
13:30-15:35
🎤会议主持人：
王贵宾教授，吉林大学
Session Chair:
Prof.Guibin WANG, Jilin University
13:30-13:55
3D打印多孔点阵功能结构设计与性能研究
杨东高级工程师，成都飞机工业（集团）有限责任公司
Design and Performance Study of 3D Printed Porous Lattice Functional Structures
Dong YANG, Senior Engineer, Chengdu Aircraft Industry (Group) Co., Ltd.
13:55-14:20
热塑性复合材料弯角区低速冲击响应研究
陈秀华正高级工程师，上海交通大学
Experimental and Numerical Study on the Low Velocity Impact Response of CFRTP Corner Region
Prof.Xiuhua CHEN, Shanghai Jiao Tong University
14:20-14:45
新型热塑性复合材料-可再加工可回收类玻璃高分子基复材
张娟院长/教授，江苏理工学院
Re-processable and Recyclable Vitrimer Composites - the New Type of Thermoplastic Composites
Prof.Juan ZHANG, Director, Jiangsu University of Technology
14:45-15:10
连续碳纤维增强PAEK预浸带的浸渍与性能对比分析
谭洪生教授，山东理工大学
Comparison and Analysis of Continuous Carbon Fiber Reinforced PAEK Prepreg Tapes Impregnation and Performance
Prof.HongshengTAN, Shandong University of Technology
15:10-15:35
基于重叠沉积的CF/PA6复合材料熔丝制造及孔隙缺陷消除机制研究
王霄翀博士研究生，南方科技大学
Overlapped deposition for eliminating voids in CF/PA6 composite fabricated using fused filament
Dr.Xiaochong WANG, Southern University of Science and Technology
15:35-16:00
☕茶歇/ Coffee Break
16:00-18:05
🎤会议主持人：
张磊研究员，航空工业第一飞机设计研究院
Session Chair:
Prof.Lei ZHANG, AVIC The First Aircraft Institute
16:00-16:25
碳纤维织物增强聚芳醚酮复合材料力学性能及湿热老化行为研究
徐香玉高级工程师，中航工业复合材料技术中心
Study on the Mechanical Properties and Hygrothermal Aging Effects of CFF/PAEK Composites
Xiangyu XU, Senior Engineer, AVIC Composite Technology Center
16:25-16:50
热塑性聚酰亚胺晶体结构模拟研究
张宝德教授，辽宁石油化工大学
Simulation Study of the Crystal Structure of Thermoplastic Polyimides
Prof.Baode ZHANG, Liaoning Petrochemical University
16:50-17:15
碳纤维增强热塑性复合材料表面改性及粘接技术研究
李栓工程师，中航工业复合材料技术中心 /北京航空航天大学
Study on Surface Modification and Bonding Technology of Carbon Fiber Reinforced Thermoplastic Composites
Shuan LI, Engineer, AVIC Composite Technology Center/School of Materials Science and Engineering, Beihang University
17:15-17:40
CF/PEEK热塑性复合材料成型热力耦合分析及失效行为研究
邱劼峥工程师，航空工业成都飞机工业（集团）有限责任公司
Thermo-Mechanical Analysis of Thermoforming and Failure Behavior in CF/PEEK Thermoplastic Composites
Jiezheng QIU, Engineer, Chengdu Aircraft industrial（Group）Corporation., Ltd
17:40-18:05
高性能PEKK树脂及其连续纤维增强热塑性复合材料产业化进展与多领域工程应用
吴健董事长，北京湃沃斯科技有限公司
Industrialization of High-Performance PEKK Resin and Continuous Fiber-Reinforced Thermoplastic Composites: Progress and Multi-Sector Engineering Applications
Jian WU, Chairman, Beijing Powers Science & Technology Co., Ltd.
18:05
分论坛(一)结束
Session ⅠClosed
分论坛（二）成型工艺与制备技术，千人宴会厅B
Session Ⅱ：Process & Manufacturing, BALL ROOM B
13:30-15:35
🎤会议主持人：
田小永教授，西安交通大学
Session Chair:
Prof.Xiaoyong TIAN, Xi'an Jiaotong University
13:30-13:55
PEEK复合材料激光辅助自动缠绕原位固结
马宏教授，西北工业大学
CF/PEEK Laser-assisted Tape Placement with In-situ Consolidation,
Prof.Hong MA, Northwestern Polytechnical University
13:55-14:20
航空热塑性复合材料量产制造和应用
朱姝教授/董事长，东华大学/苏州空天复材科技有限公司
Mass Production Manufacturing and Application of Aerospace Thermoplastic Composite
Prof.Shu ZHU, Chairperson, Donghua University, Suzhou Aerospace Composites Technology Co., Ltd.
14:20-14:45
原位聚合热塑性复合材料的研究进展
贾明印副教授/塑料机械及塑料工程研究所副所长，北京化工大学
Research Progress of In-situ Polymerized Thermoplastic Composites
A. Prof.Mingyin JIA, Deputy Director of Institute of Plastics Machinery & Plastics Engineering, Beijing University of Chemical Technology
14:45-15:10
大型复材模具增材制造关键材料与技术
李熹平教授，浙江师范大学
Key Materials and Technologies for Additive Manufacturing of Large Composite Molds
Prof.Xiping LI, Zhejiang Normal University
15:10-15:35
固体发动机热塑性复合材料壳体激光原位铺放工艺优化及成型方法
王时玉副教授，西北工业大学
Optimization and Forming Method of Laser In-situ Placement Process for Thermoplastic Composite Shells of Solid Rocket Motors
A. Prof.Shiyu WANG, Northwestern Polytechnical University
15:35-16:00
☕茶歇/ Coffee Break
16:00-18:05
🎤会议主持人：
王孝军教授，四川大学
Session Chair:
Prof.Xiaojun WANG, Sichuan University
16:00-16:25
先进复合材料增材制造技术进展及应用探索
章中森副教授，同济大学
Advances in Additive Manufacturing Technology for Advanced Composites and Its Application Exploration
A. Prof.Zhongsen ZHANG, Tongji University
16:25-16:50
基于自动铺放与连续超声焊融合的热塑复材结构制造技术及装备研究
李军利教授，上海工程技术大学
Research on Manufacturing Technology and Equipment of Thermoplastic Composite Structures Based on Automated Placement and Continuous Ultrasonic Welding Fusion
Prof.Junli LI, Shanghai University of Engineering Science
16:50-17:15
热塑性复合材料缠绕（TTW）技术——深度解析与应用前景展望
朱勇总经理，威海捷诺曼自动化股份有限公司
Thermoplastic Tape Winding (TTW) Technology — In-depth Analysis and Prospect of Application
Yong ZHU, General Manager, Weihai GERNUMAN Automation Co., Ltd
17:15-17:40
Ⅳ型热塑性复合材料储氢气瓶激光辅助缠绕成型工艺及封头补强结构研究
陈威创始人，艾思博（武汉）科技有限公司
Study on Laser-Assisted Thermoplastic Prepreg Tape Winding and Dome Reinforcement of Type IV Composite Hydrogen Storage Cylinders
Wei CHEN,Founder & CEO, Isbot (Wuhan) Technology Co., Ltd.
17:40-18:05
飞机热塑复合材料研究应用进展及挑战
丁军锋工程师，航空工业第一飞机设计研究院
Development and Challenges of Thermoplastic Composites Researchand Application for Large Aircraft
Junfeng DING, Engineer, AVIC The First Aircraft Institute
18:05
分论坛(二)结束
Session ⅡClosed
分论坛（三）后加工-连接-焊接与工程应用，贵宾厅
Session Ⅲ：Machining-Joining-Welding and Engineering Applications, LOUNGE
13:30-15:35
🎤会议主持人：
杨洋研究员，中国商飞复合材料中心
Session Chair:
Prof.Yang YANG,COMAC Composite Center
13:30-13:55
碳纤维增强热塑性树脂基复合材料（CFRTP）精密切削加工技术
葛佳教授，西北工业大学
Machining of Carbon Fibre Reinforced Thermoplastic Composites,
Prof.Jia GE,Northwestern Polytechnical University
13:55-14:20
热塑性/热固性碳纤维复合材料异质接头超声波焊接工艺研究
全东教授/研究中心副主任，山东大学
Ultrasonic Welding of Thermoplastic/thermoset Hybrid Composite Joints
Prof.Dong QUAN, Deputy Director, Advanced Manufacturing Technology and Equipment Research Center, Shandong University
14:20-14:45
基于超声焊接修复的热塑性复合材料结构性能评价及工艺仿真研究
赵天教授，北京理工大学
Investigations on Structural Behaviour Evaluation and Process Simulation of Thermoplastic Composites Repair Via ultrasonic Welding
Prof.Tian ZHAO, Beijing Institute of Technology
14:45-15:10
数据驱动热塑性复合材料电阻焊的工艺优化与质量评价
王凯副教授，北京航空航天大学
Data-Driven Process Optimization and Quality Evaluation for Resistance Welding of Thermoplastic Composites
A. Prof.Kai WANG, Beihang University
15:10-15:35
以PAEK为代表的高性能热塑性复合材料在航空领域的工程化应用展望
金子坤主管师，中航西安飞机工业集团股份有限公司
Prospects for the Application of PAEK Based Thermoplastic Composites in the Aviation Field
Zikun JIN, Head of Technology, AVIC Xi'an Aircraft Industry Group Company Ltd
15:35-16:00
☕茶歇/ Coffee Break
16:00-17:15
🎤会议主持人：
王凯副教授，北京航空航天大学
Session Chair:
A. Prof.Kai WANG, Beihang University
16:00-16:25
高性能热塑性复材焊接工艺技术及装备研究
芮建华院长，江苏集萃碳纤维及复合材料应用技术研究院
Research on Welding Process Technology and Equipment for High-Performance Thermoplastic Composites
Jianhua RUI, Director, Jiangsu JRTIR Research Institute of Carbon Fiber and Composite Applications
16:25-16:50
CFRTP焊接及其与金属的异种材料焊接技术研究
李洋副教授，天津大学
Study on The Welding of CFRTP and The Dissimilar Welding of CFRTP to Metals
A. Prof.Yang LI, Tianjin University.
16:50-17:15
热塑性沥青基碳纤维预浸料超声焊接技术的应用研究
吴莎研发工程师，陕西沥青基碳纤维科技有限公司
Application Research on Ultrasonic Welding Technology of Thermoplastic Pitch-based Carbon Fiber Prepreg